KASTAR 735 Aquarium Glass Sealant – Waterproof & Strong
Kastar 735 Acetate Aquarium Silicone Sealant is a one-part high-performance silicone sealant for aquarium-related equipment. It employs an acetic acid curing system and shows very good waterproof performance and the ability to maintain such characteristics for a long time when exposed to open weather conditions. Once they have cured they remain solid, elastomeric material that bonds very well to glass and most other materials used in the construction of aquariums.
Type: Acetoxy
Density（g/cm3）: 0.96
Capacity movement: ±30%
Skin formation: 5-15 minutes
Curing Rate (2mm/h): 10-12
Kastar 735 Acetate Aquarium Silicone Sealant is a one-part, organic silicone-based sealant for aquarium equipment. It adopts an acetic acid curing system and the product has very good water-resistant performance and it has a good performance when exposed to an outdoor environment. Once fully cured it ends up being a very strong elastomer that is extremely adhesive to glass and most aquarium substrates. This product has also passed through environmentally hostile environmental conditions and does not possess B fail hazardous material. After they have been cured they are harmless to fish and aquatic life forms. The product does not fade and can be used indoors and outdoors, non-affected by humidity, and can take constant pressure of water. This is one ideal sealant for use in the closure of fair equipment such as aquariums and glass tanks. Keep it in a cool and dry place and the product has a shelf life of twelve months in the un-opened pack.
- Designed for aquarium equipment: non-reactive and biodegradable, it is not poisonous to any water creatures.
- High adhesion: The material shows outstanding adhesion capabilities to glass and other popular OH base substrates.
- Excellent waterproof performance: designed to provide long-term water resistance to ordinary use.
- Strong weather resistance: Ultra-violet stability, abrasion resistance, excellent body resistance to all weather conditions both indoors and outdoors.
- Excellent elasticity: creates permanent and hard skin after drying.
- Easy to operate: no requirement for any mixing, single component design, and very short curing time.
1. Every variable type of aquarium glazing.
2. Bathtubs, shower tubs, sinks.
3. Joint in a humid environment.
4. Use on big glass, and glass curtain wall, Structural glazing.
|
|
|
| Item | Data |
|---|---|
| Type | Acetoxy |
| Density（g/cm3） | 0.96 |
| Capacity movement | ±30% |
| Skin formation | 5-15 minutes |
| Curing Rate (2mm/h) | 10-12 |
| Drying(4mm/h) | 24-30 |
| Max. Tensile strength | 1.3 |
| Hardness shore A | 20±2 |
| Elongation at Break(%) | ≥450 |
| Modulus Mpa(100%) | 0.55 |
| Application temperature | -20℃ to +40℃ |
| Temperature resistance | -50℃ to +100℃ |
| Adhesive | OK |
| Weatherproof | OK |
| Cold-hot adhesive | OK |
| Under water adhesive | OK |
| Elastical Recovery （％） | 96 |
| Mass-loss Rate （％） | 40 |
Kastar 735 Acetate Aquarium Silicone Sealant is a one-part, organic silicone-based sealant for aquarium equipment. It adopts an acetic acid curing system and the product has very good water-resistant performance and it has a good performance when exposed to an outdoor environment. Once fully cured it ends up being a very strong elastomer that is extremely adhesive to glass and most aquarium substrates. This product has also passed through environmentally hostile environmental conditions and does not possess B fail hazardous material. After they have been cured they are harmless to fish and aquatic life forms. The product does not fade and can be used indoors and outdoors, non-affected by humidity, and can take constant pressure of water. This is one ideal sealant for use in the closure of fair equipment such as aquariums and glass tanks. Keep it in a cool and dry place and the product has a shelf life of twelve months in the un-opened pack.
- Designed for aquarium equipment: non-reactive and biodegradable, it is not poisonous to any water creatures.
- High adhesion: The material shows outstanding adhesion capabilities to glass and other popular OH base substrates.
- Excellent waterproof performance: designed to provide long-term water resistance to ordinary use.
- Strong weather resistance: Ultra-violet stability, abrasion resistance, excellent body resistance to all weather conditions both indoors and outdoors.
- Excellent elasticity: creates permanent and hard skin after drying.
- Easy to operate: no requirement for any mixing, single component design, and very short curing time.
1. Every variable type of aquarium glazing.
2. Bathtubs, shower tubs, sinks.
3. Joint in a humid environment.
4. Use on big glass, and glass curtain wall, Structural glazing.
|
|
|
| Item | Data |
|---|---|
| Type | Acetoxy |
| Density（g/cm3） | 0.96 |
| Capacity movement | ±30% |
| Skin formation | 5-15 minutes |
| Curing Rate (2mm/h) | 10-12 |
| Drying(4mm/h) | 24-30 |
| Max. Tensile strength | 1.3 |
| Hardness shore A | 20±2 |
| Elongation at Break(%) | ≥450 |
| Modulus Mpa(100%) | 0.55 |
| Application temperature | -20℃ to +40℃ |
| Temperature resistance | -50℃ to +100℃ |
| Adhesive | OK |
| Weatherproof | OK |
| Cold-hot adhesive | OK |
| Under water adhesive | OK |
| Elastical Recovery （％） | 96 |
| Mass-loss Rate （％） | 40 |
KASTAR 965 Construction Joints MS Sealant
KASTAR 281 Acrylic Liquid Nail – Strong & Reliable Formula
